 |
 |
 |
 |
 |
 |
 |
|||
|
|||||||||
 |
 |
 |
Fire Stopping | Products RangeNullifire has a full range of Fire Stopping solutions to meet most building requirements. Construction Joints
|
| SYSTEM J2000 |
| FLEXIBLE
INTUMESCENT GAP SEAL Water resistant compressible seal offers fire, smoke and acoustic performance for horizontal and vertical structural movement joints, with up to 50% movement. |
| SYSTEM M701 |
| FLEXIBLE
ACRYLIC MASTIC Internal water-borne intumescent acrylic mastic. Offers fire, smoke and acoustic performance for horizontal and vertical structural movement joints, with up to 10% movement. |
| SYSTEM M703 |
| FLEXIBLE
SILICONE MASTIC External silicone mastic. Offers fire, smoke and acoustic performance for horizontal and vertical structural movement joints, with up to 40% movement. |
Service Penetrations
| SYSTEM B735/B747 |
| FIRE
RATED BATTS Lightweight mineral fibre fire barrier coated either side with acrylic mastic. Prevents the passage of toxic gasses, smoke and fire between compartments. Also offer acoustic and thermal insulation. |
| SYSTEM B805/B810 |
| FIRE
RATED FLEXIBLE CURTAIN Lightweight flexible fire rated fabric. Designed to be stretched between perimeter fixings to prevent the passage of smoke and fire. |
| SYSTEM B760 |
| FIRE
RATED INTUMESCENT SEAL BAGS Temporary or permanent fire rated seal bags. These hardwearing fabric bags are designed to fill wall or floor penetration and are easily modified for new services. |
| SYSTEM B150 |
| FIRE
RATED PIPE COLLAR Surface mounted intumescent pipe collar designed to close off, or around uPVC, PVC and steel pipe penetrations, preventing the passage of smoke and fire. SYSTEM B150 4 Hours SYSTEM B150 2 Hours |
| SYSTEM B300 |
| FIRE
RATED PIPE WRAPS Internally located intumescent pipe wraps designed to close off PVC and uPVC pipes, preventing the passage of smoke and fire. |
| SYSTEM B220/B240/B270 |
| FIRE
RATED COMPOUND Load bearing and non-load bearing compounds designed to seal around multi-service penetrations. SYSTEM B220 SYSTEM B240 SYSTEM B270 |
| SYSTEM B600 |
| FIRE
RATED INSULATED PIPE SLEEVE Easy Fit intumescent pipe sleeve, offers thermal insulation, vapour seal of traditional lagging whilst providing up to 120 minutes fire protections, for steel, copper and plastic pipe penetrations. |
Click on any of the above product introduction for further information, or for direction on product selection click on ‘PRODUCT SELECTOR’
For further information please contact Nullifire Technical Services Department
| Tel: | 024 7685 5000 |
| E-mail: | protect@nullifire.com |
