FZ400 Movement Joint Filler

FZ400 Movement Joint Filler is a fire protection solution, tested for use in linear joints (both vertical and horizontal) and as a method to provide penetration seal movement around and at the head of Nullifire FB750 Intubatt. It is also tested to be used as cable trunking infill. Nullifire's patented GXT (Graphite eXpansion Technology) has been incorporated within Nullifire FZ400.

Usage/purpose

FZ400 is tested and suitable to be installed around, and to the head of, FB750 Intubatt service penetration seals. The product will allow and absorb any deflection, differential and service movement up to ±30mm (tested) and up to ±60mm (theoretically). FZ400 has been cyclic tested and subsequently fire tested with the inclusion of service penetrations.

FZ400 may be used to reinstate the performance of fire compartment lines, both walls and floors, where construction joints require a physical movement seal and a specific fire rating.

FZ400 has been tested in linear joints up to 115mm gap width in walls / 150mm gap width in floors.

FZ400 has 60% demonstratable compression capability (compress and return). It is tolerant of movement and is used in areas where standard mastic joints are not suitable. FZ400 offers a solution for areas subject to regular cycles of expansion and contraction or vibration, in compression, where reliability is vital.
FZ400 is also designed to provide a permanent fire barrier within trunking boxes passing through fire compartment walls. It has been tested within flexible walls.