SC804 Intumescent Steel Coating - On-Site, Water Based
SC804 Intumescent steel coating is a very low VOC, borate free, APEO free, water-based, thin film intumescent coating for the protection of structural steelwork. SC804 contains no substances of very high concern.
Usage/purpose
SC804 is optimised to provide 90 minutes fire resistance to ‘I’ section beams and columns, hollow columns, hollow beams, cellular beams, concrete filled hollow columns and solid steel tension rods. Limited 120 minutes protection is also available. SC804 can be used on steel, cast iron and galvanised steel.
Detailed application instructions are available for SC600, SC800 and SC900 series that must be consulted prior to commencing application. Please visit https://www.nullifire.com/en_GB/technical-zone/download-centre/
Safety data sheet must be read and understood before use.
- Ultra Low VOC.
- Competitive loadings.
- Compatible with a wide range of primers and topcoats.
- Easy to apply, with excellent aesthetics.
- Optifire®+ unique traceability identifier.
- Certifire CF5929.
- 3 months without topcoat once fully dried (see Environmental Resistance section)
| Nullifire Application Instructions SC800 Series (en-GB).pdf | Application Instructions | |
| SC804 EN13381-6 Concrete Filled Hollow Columns (en-GB).pdf | Loading Tables | |
| SC804 EN13381-10 Solid Steel Bars Loading Tables (en-GB).pdf | Loading Tables | |
| SC804 Loading Tables (en-GB).pdf | Loading Tables | |
| SC804 Consolidated BS MTA Loading Tables (en-GB).pdf | Loading Tables | |
| SC804 Safety Data Sheet (en-GB).pdf | Safety Data Sheets | |
| SC804 Eco Footprint (en-GB).pdf | Technical Guidance Document | |
| SC804 Carbon Footprint (en-GB).pdf | Technical Guidance Document | |
| Nullifire Specification Control Guidance Note (en-GB).pdf | Technical Guidance Document | |
| SC804 Technical Data Sheet (en-GB).pdf | TDS |
.jpg)
